How to Deploy Your Own Algo VPN Server in the DigitalOcean Cloud

When analyzing malware or performing other security research, it’s often useful to tunnel connections through a VPN in a public cloud. This approach helps conceal the analyst’s origin, contributing to OPSEC when interacting with malicious infrastructure. Moreover, by using VPN exit nodes in different cities and even countries, the researcher can explore the target from multiple geographic vantage points, which sometimes yields additional findings.

One way to accomplish this is to set up your own VPN server in a public cloud, as an alternative to relying on a commercial VPN service. The following tutorial explains how to deploy the Algo VPN software bundle on DigitalOcean (the link includes my referral code). I like using DigitalOcean for this purpose because it offers low-end virtual private server instances for as little as $5 per month; also, I find it easier to use than AWS.

Algo VPN Overview

Algo is an open source software bundle designed for self-hosted IPSec VPN services. It was designed by the folks at Trail of Bits to be easy to deploy, rely only on modern protocols and ciphers and provide reasonable security defaults. Also, it doesn’t require dedicated VPN client software for connecting from most systems and devices, because of native IPSec support.

To understand why its creators believe Algo is a better alternative to commercial VPNs, the Streisand VPN bundle and OpenVPN, read the blog post that announced Algo’s initial release.  As outlined in the post, Algo is meant “to be easy to set up. That way, you start it when you need it, and tear it down before anyone can figure out the service you’re routing your traffic through.”

Creating a DigitalOcean Virtual Private Server

To obtain an Internet-accessible system where you’ll install Algo VPN server software, you can create a “droplet” on DigitalOcean running Ubuntu 16.04 with a few clicks.

Accepting default options for the droplet should be OK in most cases. If you’re not planning to tunnel a lot of traffic through the system, selecting the least expensive size will probably suffice. Select the geographic region where the Virtual Private Server will run based on your requirements. Assign a hostname that appeals to you.

Once the new host is active, make a note of the public IP address that DigitalOccean assigns to it and log into it using SSH. Then run the following commands inside the new virtual private server to update its OS and install Algo VPN core prerequisites:

apt-add-repository -y ppa:ansible/ansible
apt-get update -y
apt-get upgrade -y
apt-get install -y software-properties-common python-virtualenv ansible

At this point you could harden the configuration of the virtual private server, but these steps are outside the scope of this guide.

Installing Algo VPN Server Software

Next, obtain the latest Algo VPN server software on the newly-setup droplet and prepare for the installation by executing the following commands:

git clone
cd algo
python -m virtualenv env
source env/bin/activate

Set up the username for the people who will be using the VPN. To accomplish this, use your favorite text editor, such as Nano or Vim to edit the config.cfg file in the ~/algo directory:

vim config.cfg

Remove the lines that represent the default users “dan” and “jack” and add your own (e.g., “john”), so that the corresponding section of the file looks like this:

 - john

After saving the file and exiting the text editor, execute the following command in the ~/algo directory to install Algo software:


When prompted by the installer, select 5 to install “to existing Ubuntu 16.04 server”.

When proceeding with the installer, you should be OK  in most cases by accepting default answers with a few exceptions:

  • When asked about the public IP address of the server, enter the IP address assigned to the virtual private server by DigitalOcean when you created the droplet.
  • If planning to VPN from Windows 10 or Linux desktop client systems, answer “Y” to the corresponding question.

After providing the answers, give the installer a few minutes to complete its tasks. (Be patient.) Once it finishes, you’ll see the “Congratulations!” message, stating that your Algo server is running. Make a note of the “p12 and SSH keys password for new users” that the message will display, in case you need to use it later.

Configuring VPN Clients

Once you’ve set up the Alog VPN service, follow the instructions on the Algo website to configure your VPN client. The steps are different for each OS. Fortunately, the Algo setup process generates files that allow you to accomplish this with relative ease. It stores the files in under ~/algo/configs in a subdirectory whose name matches your server’s IP address.

For instance, to configure your iOS device, transfer your user’s Apple Profile file that has the .mobileconfig extension (e.g., john.mobileconfig) to the device, then open the file to install it. Once this is done, you can go to Settings > VPN on your iOS device to enable the VPN when you wish to use it. If at some point you wish to delete this VPN profile, go to General > Profile.

If setting up the VPN client on Windows 10, retrieve from the Algo server your user’s file with the .ps1 extension (e.g., windows_john.ps1) and the file with the .p12 extension (e.g., john.p12). Then, open the Administrator shell on the Windows system and execute the following command from the folder where you’ve placed these files, adjusting the file name to match your name:

powershell -ExecutionPolicy ByPass -File windows_john.ps1 Add

This will import the appropriate certificate information and create the VPN connection entry. To connect to the VPN server, go to Settings > Network & Internet > VPN. If you wish to remove the VPN entry, use the PowerShell command above, replacing “Add” with “Remove”.

Additional Considerations for Algo VPN

Before relying on VPN to safeguard your interactions with malicious infrastructure, be sure to confirm that it’s concealing the necessary aspects of your origin. If it’s working properly, the remote host should see the IP address of your VPN servers, instead of the IP address of your VPN client. Similarly, your DNS traffic should be getting directed through the VPN tunnel, concealing your client’s locally-configured DNS server. One way to validate this is to use, comparing what information the site reveals before and after you activate your VPN connection. Also, confirm that you’re not leaking your origin over IPv6; one way to do that is by connecting to

You can turn off the virtual private server when you don’t need it. When you boot it up again, Algo VPN software will automatically launch in the background. If running the server for longer periods of time, you should implement security measures necessary appropriate for Internet-connected infrastructure.

As you use your Algo VPN server, adversaries might begin tracking the server’s IP address and eventually blacklist it. Therefore, it’s a good idea to periodically destroy this DigitalOcean droplet and create a new one from scratch. This will not only change the server’s IP address, but also ensure that you’re running the latest version of VPN software and its dependencies. Unfortunately, after you do this, you’ll need to reimport VPN client profiles to match the new server’s IP address and certificate details.


About the Author

Lenny Zeltser is a seasoned business and technology leader with extensive information security experience. He builds innovative endpoint defense solutions as VP of Products at Minerva. He also trains incident response and digital forensics professionals at SANS Institute. Lenny frequently speaks at industry events, writes articles and has co-authored books. He has earned the prestigious GIAC Security Expert designation, has an MBA from MIT Sloan and a Computer Science degree from the University of Pennsylvania.

Learn more